NCR 300
4 eksen CNC Kontrollü Kopya Freze Makinesi 4 axis CNC Controlled Copy Router Machine
NCR 300
4 eksen CNC Kontrollü Kopya Freze Makinesi
4 axis CNC Controlled Copy Router Machine
Alüminyum ve PVC profillerin 4 tarafını şablon gerektirmeden hızlı ve hassas işleyebilen, kapı ve kanatlarda barel yuvası, kilit ve kol yeri deliklerini ve ispanyolet yeri açılması için tasarlanmış 4 eksenli CNC kontrollü kopya freze makinedir.
The new concept in copy routers, this single head copy router has the ability to program X, Y, Z and C coordinates with 4 axis servo controlled motors . It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on PVC and aluminum profiles, this means no more template
GENEL ÖZELLİKLER
- PVC, Alüminyum ve düşük alaşımlı malzemelerin 4 yüzeyini aynı anda işlemek amacı ile günlük operasyonlar için dizayn edilmiştir.
- Profillerin 4 yüzeyini -0°/90°/180/270° açı aralığında işleyebilmek için servo motor kontrollü tabla mekanizması mevcuttur
- Tek operasyonda işleme kapasitesi: (X) 350mm, (Y) 160 mm, (Z) 115 mm
- Bağlanabilir profil genişliği (max. /min.):160 x 30 mm
- Bağlanabilir profil yüksekliği (max./ min.) : 115 x 30 mm
- Bağlanabilir profil boyu: (max. / min.) : 3000 x 400 mm
- ER 25 takım tutucu
- Farklı devirde kullanım için 2.2 kW, 3P, 400V frekans ayarlı motor (0- 12000)p.m
- PLC kontrol sistemi
- Kafa ve tabla düşmelerine karşılık elektronik ve pnömatik frenleme sistemi
GENERAL FEATURES
- Designed for the day to day operations on PVC, aluminum and low alloy materials the four surfaces of profiles at the same time
- Equipped with servo controlled table mechanism to stop the turning table and machining the profile in any angle among the 0°/90°/180/270°
- Machining capacity in single operation X: 350 mm, Y: 160 mm, Z: 130 mm
- Profile clamping width (max /min): 160 x 30 mm
- Profile clamping height (max. / min.): 115 x 30 mm
- Profile clamping length: (max. / min.): 3000 x 400 mm
- Equipped with variable speed spindle adjusted from 0 to 12000 rpm with 2.2 kW
- PLC control system
STANDART AKSESUARLAR
- Ø8 x L: 120 mm freze ucu
- 2 x yatay ve 2 x dikey mengene
- Püskürtmeli freze takım soğutma sistemi
- Hava tabancası
- Sağ ve sol profil dayama
- Servis anahtarı (24 mm)
- Pens anahtarı
- LED aydınlatma sistemi
STANDARD EQUIPMENT
- Ø 8 mm x L 120 mm cutter bit
- 2 x horizontal and 2 x vertical clamps
- Spray tool lubrication system
- Air gun
- Left and right profile stops
- Service spanners (24 mm)
- Collet wrench
- LED lighting equipment